Hydraulic Valves

These are valves used for directional control and pilot. Proportional directional valves containing electronic cards are available.

SVS0.M18.00.N00 — 2/2-way (two ports, two positions), single solenoid hydraulic valve, VIS.

SVS0.M20.00.N00 — 2/2-way (two ports, two positions), single solenoid hydraulic valve, VIS.

SVS0.S08.06.F00 — Hydraulic valve governing circuit operating characteristics by controlling flow between pump and actuator, VIS.

SVS0.S09.00.F00 — Single solenoid hydraulic valve, VIS.

SVS0.S10.00.N00 — Hydraulic control valve that regulates flow direction, rate, or pressure in hydraulic circuits, VIS.

SVS0.S10.06.N00 — Hydraulic control valve that regulates flow direction, rate, or pressure in hydraulic circuits, VIS.

SVS0.S12.00.N00 — 2/2 normally closed, 150 l/min hydraulic valve, VIS.

SVY0.S08.08.H01 — Double solenoid hydraulic valve, VIS.

VMD160C2 — Control element that determines flow routing and pressure limits in hydraulic lines, OLEOWEB.

VMD8C3 — Hydraulic valve governing circuit operating characteristics by controlling flow between pump and actuator, OLEOWEB.

MTCV-02A-K-20 — Hydraulic valve governing circuit operating characteristics by controlling flow between pump and actuator, GREENS.

4WE10HA31B — Single solenoid hydraulic valve, GREENS.

GE1 G1/2 — 1/2" hydraulic valve, GEMELS.

MTCV-02B-K-20 — Hydraulic valve governing circuit operating characteristics by controlling flow between pump and actuator, GREENS.

UFC1B05 — 1/4" hydraulic valve, FLUID-APP.

UFC2B05 — 3/8" hydraulic valve, FLUID-APP.

UFC4B05 — 3/4" hydraulic valve, FLUID-APP.

UFC5B05 — 1" port (BSP) hydraulic valve, FLUID-APP.

UFC6B05 — 1" port (BSP) hydraulic valve, FLUID-APP.

UFC7B05 — 1" port (BSP) hydraulic valve, FLUID-APP.

4WEH25E-ET-D24L — Hydraulic valve governing circuit operating characteristics by controlling flow between pump and actuator, GREENS.

VBCB380 — 3/8", banjo type connection, 350 bar hydraulic valve, OLEOWEB.

To prevent the load in the system from releasing itself while the directional control valve is in the middle position. Tolerating leaks between the slide and the body when a closed center valve is used.