Hydraulic Valves

VBCC1202C — Closed center hydraulic valve, OLEOWEB.

VBCD series valves provide load control in actuators in both directions. The pressure can be adjusted precisely. VBCD series valves can be mounted directly on the cylinder thanks to the connection surface...

When the directional control valve is in the middle position, the system prevents the load from releasing itself. Face type connection.

In this type of application, while the load is being lowered, the load and the gravitational force is in the same direction. This may cause uncontrolled movement of the load. At this point, the load holding valve comes into play and the hydraulic...

VBCS06 — Hydraulic control valve that regulates flow direction, rate, or pressure in hydraulic circuits, OLEOWEB.

VBD2B — 3/8", BSP (ISO 228 parallel pipe thread), double-acting hydraulic valve, FLUID-APP.

VBDC3802 — Control element that determines flow routing and pressure limits in hydraulic lines, OLEOWEB.

VBFP380 — 3/8" hydraulic valve, OLEOWEB.

While the load is being lowered, the load and gravity force are in the same direction, uncontrolled movement may occur. The load holding valve is activated and provides controlled movement by monitoring the flow from the hydraulic motor. Face type connection...

It serves as a one-sided locking function used on the piston. It is widely used in the field of mobile hydraulics. It works perfectly thanks to its precise pilot ratios.

VDF3B — 1/2" hydraulic valve, FLUID-APP.

VMD160C3 — 3/4-16 UNF hydraulic valve, OLEOWEB.

VMD1C1 — 3/4-16 UNF hydraulic valve, OLEOWEB.

VMD1C2 — 3/4-16 UNF hydraulic valve, OLEOWEB.

VMD1C3 — 3/4-16 UNF hydraulic valve, OLEOWEB.

VMD1C4 — 3/4-16 UNF hydraulic valve, OLEOWEB.

VMD8C2 — Hydraulic control valve that regulates flow direction, rate, or pressure in hydraulic circuits, OLEOWEB.

Pressure control valves bring the system pressure to the desired level through mechanical, electrical or hydraulic action. The pressure control valve system can cause damage, loss of power and overheating...

VPD2B — 3/8", BSP (ISO 228 parallel pipe thread), double-acting hydraulic valve, FLUID-APP.

Flow control valves are used to adjust the speed of actuators in hydraulic systems. These valves keep the flow rate in the P line constant and the increased flow is sent to the tank line.

Carric type check valve. Various thread sizes.

Flow control valves are used to adjust the speed of actuators in hydraulic systems. It keeps the flow rate in the P line constant.

VRC120 — Control element that determines flow routing and pressure limits in hydraulic lines, OLEOWEB.

VRC380 — Hydraulic control valve that regulates flow direction, rate, or pressure in hydraulic circuits, OLEOWEB.