
400/20 MT CABLE DRUM
400/20 ROLL MAJOR — Electrical equipment used for control and feedback on machinery, MAVEL.
Filter our hydraulic and pneumatic system components by category, brand or product name.
17 PRODUCTS (FILTERED)
A hydraulic or pneumatic circuit does not run on the fluid side alone: pressure, position and time have to be read and commanded electrically. This group brings together the electrical and electronic interface of the circuit. Pressure switches compare line pressure with a set threshold and switch a contact. EUROSWITCH models are listed with 1/8" connection, adjustment ranges of 1–10 bar, 20–50 bar and 50–200 bar, and normally open, normally closed and double contact versions. For reading the end positions of pneumatic cylinders there are CS1-E, CS1-J and CS1-U magnetic sensors together with the MS-31 piston sensor; because they detect the magnet inside the cylinder tube, no separate mechanical limit switch is needed. On the operator interface side, control lever (joystick) blocks are listed from 1P 40 up to 6P 80; the catalogue figure is 200 bar maximum pressure with G1/2 connections (G3/4 on the return line), selectable from one to six sections. The group also covers 400/20 and 400/30 cable reels, the TM-01 timer relay and digital or PLC controlled YET/YAK series lubrication controllers. Send us your adjustment range, contact type and supply voltage and we will settle on the right model together.

400/20 ROLL MAJOR — Electrical equipment used for control and feedback on machinery, MAVEL.

400/30 ROLL MEGA — Component used on the electrical control side of pneumatic/hydraulic circuits, MAVEL.

Double contact pressure switches. These are devices that measure the pressure levels of systems and convert the measured pressure into an electrical signal.

Pressure switches are devices that measure the pressure levels of the systems and convert the measured pressure into an electrical signal. Hydraulic directional control valves in purification systems, food industries, pharmaceutical industry, chemical industries, t...

DNGTRZBÜYÜK — Electrical equipment used for control and feedback on machinery, GREENS.

They are mechanical directional control stations that provide control of pressurized oil. Direction control can be made easily according to the desired flow rate.

CS1-E — Component used on the electrical control side of pneumatic/hydraulic circuits.

CS1-J — Electrical equipment used for control and feedback on machinery.

CS1-U — Component used on the electrical control side of pneumatic/hydraulic circuits.

MS-31R-1 DNC SENSOR — Electrical equipment used for control and feedback on machinery, PNEUBIG.

TM-01 — Component used on the electrical control side of pneumatic/hydraulic circuits, PNEUBIG.

Automatic lubrication unit with piston and resistance system. PLC control system.

In applications that require lubrication by motor and gear transfer method, equal amounts are applied to one or more lubrication points such as linear slide, friction slide, bearing, felt, etc., thanks to proportional distributors...
Piston system, digital display lubrication unit. 2L and 4L tank options.

Automatic lubrication unit with PLC control system.

Automatic lubrication unit with manually controlled piston system.

Press type (hand-pulled) lubrication unit. Right or left handed use, Q4 and Q6 outlet holes.
Contact us for special pricing and deadlines for your OEM needs and large-scale projects.