01
FAT — Factory Acceptance
1.5x working pressure + tightness + function test in the workshop; customer testimony.
[ 11 / SERVICE ]
Test & Commissioning.
Acceptance tests from workshop to field (FAT, SAT) and commissioning — delivery with certified report.
Test; It is the moment when engineering design confronts field reality. Hydroport carries out this facing with standard protocols: FAT, SAT, performance testing and certification.
What do we offer in this service?
- FAT — Factory Acceptance Test, 1.5x pressure in the workshop
- SAT — Site Acceptance Test, actual load on site under
- Leakage test (helium monitoring optional)
- Performance test (pressure-flow characteristic)
- Certified report + production book
[ SCOPE OF SERVICE ]
Test types.
02
SAT — Site Acceptance
Performance + safety testing under real load after assembly in the field.
03
Performance Test
Pump pressure-flow characteristic, cylinder speed profile, valve response time.
04
Periodic Retest
Annual mandatory pressure control (PED compliance) and certification renewal.
[ PROCESS ]don't work with you
don't work with you
Our form.
5 steps from first phone call to guaranteed delivery. Transparent, measurable and with engineering discipline.
- 01
Needs Analysis
We start with field survey, line conditions and existing system breakdown.
- 02
Solution Design
We prepare technical file with circuit diagram, hydraulic calculation and BOM.
- 03
Offer & Approval
We offer transparent item-by-item offer, deadline and payment plan.
- 04
Application
Manufacturing in our own facility, delivery with assembly and testing in the field.
- 05
Maintenance & Support
Periodic maintenance contract and 7/24 emergency service. We have your back with.
Test equipment park.
| Equipment | Spec |
|---|---|
| Hydraulic test bench | 700 bar × 200 L/min, 4 line output |
| Data logger | HMG 4000 (8 channel pressure + 4 temperature) |
| Leak tightness test | Helium leak detector (10⁻⁹ mbar·L/s) |
| Temperature | K-type thermocouple + IR (FLIR) |
| Flow meter | Turbine + gear flowmeter (certified) |
| Accreditation | Calibration from TÜRKAK accredited laboratory |
Field stories.
IRIS compatible FAT
Workshop acceptance tests of 30 locomotive set on tram hydraulic brake test bench; The certificate file was submitted to UNIFE.
Helium sealing
Military vehicle hydraulic system helium leak test; The certificate is in MIL-STD-810 standard.
Frequently asked questions.
Is customer-witnessed testing possible?
Yes. FAT is compulsorily witnessed in the workshop; SAT customer + Hydroport engineer together on site.
Are your certificates valid internationally?
Our test equipment is calibrated by TÜRKAK accredited laboratory; Our reports are written in EN/ISO standards and are valid in the EU.
Is periodic PED testing mandatory?
Annual testing is a legal requirement for systems that fall into the pressure equipment category. Hydroport gives this test within the scope of the contract.
[ CONTACT ]
Let's prepare for the certified test.
Let's write the test protocol together; Let's create a schedule for FAT and SAT.